(612) 400-4180
Back to Blog
Cost Guide

New Garage Door Cost in Minnesota: What to Budget in 2026

October 31, 2026 Minneapolis, MN
New garage door installation completed at a Minneapolis area home

Most Minnesota homeowners spend $900 to $2,500 to replace a garage door, including removal and installation. A basic single-car steel door lands near the lower end. An insulated double-car door with a carriage-style panel face lands near the higher end or above it. The two biggest levers are the size of the opening and whether you add insulation, which matters more here than in most parts of the country because of what Minnesota winters do to an attached garage.

What a new garage door costs in the Twin Cities

The table below shows typical installed ranges based on door type and material. Installed means the door itself, removal of the old door, and labor, which is how most quotes are structured.

Door typeOpening widthMaterialTypical installed cost
Single-car8 to 9 ftStandard steel$600 to $1,200
Single-car8 to 9 ftInsulated steel$900 to $1,800
Double-car16 ftStandard steel$900 to $1,800
Double-car16 ftInsulated steel$1,200 to $2,800
Double-car16 ftWood or wood composite$2,500 to $6,000+

These are typical Twin Cities industry ranges. The actual number depends on the specific door model, whether the opening is a standard size, and whether any header or track work is needed at the same time.

Five factors that move the cost the most

1. Single car vs double car

A single-car door covers an 8- or 9-foot opening. A double-car door covers 16 feet. The wider door needs heavier springs, a stronger cable system, and more material, so the cost is higher across every category. Most attached garages built in the Twin Cities metro after 1980 have a double-car opening. Older detached alley garages in Minneapolis and St. Paul commonly have single-car doors.

2. Material

Steel is the most common and least expensive option. It holds paint well, resists dents on standard gauge, and handles Minnesota's temperature swings without warping. Wood and wood composite doors cost more and need periodic painting or staining, but they suit craftsman and older traditional homes well. Aluminum with glass panels costs more than steel and provides no insulation, so it sees limited use in this climate.

3. Insulation and R-value

A standard steel door has no insulation or a very thin layer. An insulated steel door sandwiches foam between two steel skins and carries an R-value rating, usually R-9 to R-16 for residential doors. Adding insulation typically adds $200 to $600 to the door price. In an attached Minnesota garage, the difference between an uninsulated and a well-insulated door can be 15 to 20 degrees of garage temperature on the coldest days. That matters if you have a water heater in the garage, living space above it, or if you work out there regularly.

4. Panel style

Traditional raised-panel steel is the least expensive. Carriage-house or craftsman-style panels use thicker steel and more tooling, which adds $100 to $400 depending on the manufacturer. Contemporary flush panels and full-view glass doors cost more and are less common in standard residential applications, though they are increasingly popular on newer construction.

5. Whether you replace the opener at the same time

If the door is being replaced because a single panel was damaged, the existing opener may still work fine. If the opener is more than 12 to 15 years old, or if the new door weighs significantly more than the old one, replacing both at the same time is usually worth it. It saves a return visit and means the opener is sized correctly for the new door's weight.

What the installation cost covers

Labor for a garage door installation in the Twin Cities typically runs $150 to $400 on its own. Most quotes bundle it with the door, but if you are pricing a door you bought separately or comparing quotes from different companies, it helps to know what labor includes. The installation covers removing the old door and all hardware, installing the new panels and track, setting the spring and cable tension, attaching the opener rail and drive, and testing the travel limits and the auto-reverse safety sensors.

A standard same-size replacement on a clear opening takes two to three hours. A non-standard size, a damaged header, or a track system that needs replacement adds time and cost.

New garage door cost ranges by door type and material in the Twin Cities 2026
Typical installed cost for a new garage door in the Twin Cities. Prices include door, removal of the old door, and labor. Source: industry pricing data.

Why insulation matters more in Minnesota

Minnesota winters regularly push temperatures well below 0 degrees Fahrenheit for days at a stretch. An uninsulated garage door transfers that cold directly into the garage space. On an attached garage, that cold works against the wall shared with your living space and can cause problems for pipes near the exterior. A door rated R-9 or higher will not solve every heat loss issue in an uninsulated garage, but it removes one of the largest single sources of cold infiltration.

The bottom seal and weatherstripping also matter. A worn seal lets cold air and moisture under the door at the slab edge, which is where freeze-related problems start, including the door freezing to the floor on a wet night. When replacing a door, confirm that the bottom seal and the side and top weatherstripping are part of what is being installed. Most jobs include this, but it is worth verifying.

Replacing one panel vs replacing the whole door

If a single panel is dented but the rest of the door is in good shape, panel replacement is usually the cheaper path. It makes sense when the door is less than 10 to 12 years old, when the frame and track are undamaged, and when the panel is still available from the manufacturer. Once a door is more than 12 years old, when two or more panels are damaged, or when the frame is bent from a vehicle collision, a full replacement typically delivers better long-term value. The new door comes with new springs, cables, and rollers, and you are not trying to match a panel style that may have been discontinued. Our repair or replace guide covers the full decision in more detail.

What to expect when you get a quote

A quote for a new garage door takes 15 to 30 minutes. A technician measures the opening width and height, checks the headroom above the door (which determines the track configuration), looks at the condition of the header and side jambs, and reviews the opener situation. You get an upfront price before any work starts. Most standard-size replacements can be done the same day if the door is in stock.

Pronto handles new door installation across Minneapolis and the Twin Cities metro, seven days a week. Free estimates, upfront pricing, no obligation. Call or text (612) 400-4180.

Frequently Asked Questions

How much does a new garage door cost in Minnesota?

A new garage door installed in the Twin Cities typically runs $600 to $1,200 for a basic single-car steel door and $1,200 to $2,800 for an insulated double-car steel door. These ranges include the door, removal of the old door, and labor. Wood and custom doors can run $2,500 to $6,000 or more depending on design and size.

Is insulation worth paying for on a new garage door in Minnesota?

On an attached garage, yes. Minnesota winters bring cold that an uninsulated door lets directly into the garage space, which affects the wall shared with the house and any pipes near the exterior. An insulated door rated R-9 or higher makes a measurable difference in garage temperature and is generally worth the added cost for an attached garage in this climate.

Can I replace just one damaged panel instead of the whole door?

Yes, if the rest of the door is in good condition, the frame is not bent, and the replacement panel is still available from the manufacturer. Panel replacement is usually cheaper than a full door swap when the door is less than 10 to 12 years old and only one section is damaged. When the door is older or multiple panels are damaged, a full replacement is usually the better value.

How long does a new garage door installation take?

A standard replacement on a normal opening takes two to three hours. That includes removing the old door and hardware, installing the new door, setting the springs and cables, and testing the opener and safety sensors. A non-standard size, a damaged header, or a track system that needs replacement will add time.

Should I replace the opener at the same time as the door?

Not always, but if the opener is more than 12 to 15 years old, or if the new door is significantly heavier than the old one, replacing both at the same time is usually worth it. It avoids a return visit and ensures the opener is properly matched to the new door's weight and size.

Get an Upfront Price for Your New Door

Call or text (612) 400-4180 for a free estimate. Pronto covers the Twin Cities seven days a week with same-day service on most standard door replacements.